Indiana Crane Accident Lawyer- Indiana Construction Accident Lawyer- Indianapolis Indiana

Monday, January 18, 2010 by John Daly
"Not All Personal injury Lawyers are Construction Accident Lawyers"


Your Indiana Construction Accident Lawyer in Indianapolis is starting to once again see cranes doting the skyline in his travels throughout Indiana. Unfortunately, there are no small crane accidents. Here is one of the worst in history, causing the death of three iron workers.
 

Every Construction season should start by remembering how quickly construction  accidents can happen, usually when Safety is being sacrificed for Speed.

Here are OSHA and IOSHA tips on preventing Crane accidents in Indiana:

Protect Yourself
Crane Safety
Crane SafetyFatalities and serious injuries can occur if cranes are not inspected and used properly. Many fatalities can occur when the crane boom, load line or load contacts power lines and shorts electricity to ground. Other incidents happen when workers are struck by the load, are caught inside the swing radius or fail to assemble/ disassemble the crane properly.
  • Cranes are to be operated only by qualified and trained personnel.
  • A designated competent person must inspect the crane and all crane controls before use.
  • Be sure the crane is on a firm/stable surface and level.
  • During assembly/dis assembly do not unlock or remove pins unless sections are blocked and secure (stable).
  • Fully extend outriggers and barricade accessible areas inside the crane’s swing radius.
  • Watch for overhead electric power lines and maintain at least a 10-foot safe working clearance from the lines.
  • Inspect all rigging prior to use; do not wrap hoist lines around the load.
  • Be sure to use the correct load chart for the crane’s current configuration and setup, the load weight and lift path.
  • Do not exceed the load chart capacity while making lifts.
  • Raise load a few inches, hold, verify capacity/balance, and test brake system before delivering load.
  • Do not move loads over workers.
  • Be sure to follow signals and manufacturer instructions while operating cranes.


For more complete information:
OSHAOccupational
Safety and Health
Administration
U.S. Department of Labor
www.osha.gov (800) 321-OSHA

OSHA 3267-09N-05
While there is a lot more to know about preventing Crane accidents, these are important tips to keep you safe and get you home at the end of the day.

If you can avoid a construction accident, please do.
If it is too late, Please call. I have represented hundreds of Indiana  Construction workers, union and non union, in crane accidents, trench collapse accidents, iron-worker falls, mason falls from scaffolds, heavy equipment accidents and road construction accidents. Although  our office in Indianapolis, I have represented injured construction workers and their families in South Bend, Fort Wayne, Terre Haute, Evansville and Bloomington. 
No lawyer can guarantee a great result, only great effort. I will do my damnedest to get you and your family everything they deserve if you have been injured in a construction accident and need a construction accident lawyer. BE SAFE, call when you need help. FREE CASE EVALUATION!

John

Crane Accident Video from Your Construction Accident Lawyer Indiana

Monday, June 1, 2009 by John Daly
So far this year there seem to be fewer  Indiana crane accidents, according to your Construction Accident Lawyer in Indianapolis Indiana. This may be  a result of the recession decreasing the over all number of Crane Accidents in Indiana,  better safety practices by the crane companies and general contractors, or better enforcement of Crane safety OSHA and IOSHA regulations. Perhaps alll of the above.  The Crane accidents most frequently seen by your Indiana Construction Accident Law firm involve contact with power lines resulting in electrocution,  or instability of the crane resulting it tipping over.  Other frequent crane accidents involve improper rigging and other material handling mishaps.  As a reminder, here is a video of one of the New York City Crane accidents from last  year.  



Here are tips from OSHA about avoiding Crane accidents:


Crane Safety
Crane SafetyFatalities and serious injuries can occur if cranes are not inspected and used properly. Many fatalities can occur when the crane boom, load line or load contacts power lines and shorts electricity to ground. Other incidents happen when workers are struck by the load, are caught inside the swing radius or fail to assemble/ disassemble the crane properly.
  • Cranes are to be operated only by qualified and trained personnel.
  • A designated competent person must inspect the crane and all crane controls before use.
  • Be sure the crane is on a firm/stable surface and level.
  • During assembly/disassembly do not unlock or remove pins unless sections are blocked and secure (stable).
  • Fully extend outriggers and barricade accessible areas inside the crane’s swing radius.
  • Watch for overhead electric power lines and maintain at least a 10-foot safe working clearance from the lines.
  • Inspect all rigging prior to use; do not wrap hoist lines around the load.
  • Be sure to use the correct load chart for the crane’s current configuration and setup, the load weight and lift path.
  • Do not exceed the load chart capacity while making lifts.
  • Raise load a few inches, hold, verify capacity/balance, and test brake system before delivering load.
  • Do not move loads over workers.
  • Be sure to follow signals and manufacturer instructions while operating cranes.


For more complete information:
OSHAOccupational
Safety and Health
Administration
U.S. Department of Labor
www.osha.gov (800) 321-OSHA

OSHA 3267-09N-05
 www.osha.govwww.dol
If you or a loved one has been injured in a crane accident and need to discuss your case with a crane accident lawyer in Indiana, I would be happy to speak with you at no charge. We represent operators, electricians, masons, ironworkers and laborers in construction accidents throughout Indiana, including Indianapolis, Fort Wayne, Richmond, Evansville, Terre Haute and South Bend. BE SAFE!  

Road Construction Accident Lawyer Indiana Report on Road Construction Accident in Lakeville Indiana

Monday, May 11, 2009 by John Daly
Road Construction accidents are popping up like morel mushrooms says your Indiana Construction accident Lawyer in Indianapolis, Indiana.  There was a multi vehicle crashed that apparently occurred when a piece of heavy equipment was  rear ended on state road 4 and US  31 in Lakeville Indiana on May 7th, 2009. Facts are still developing, but there are state and federal regulations on safety in road  construction zones. Here is a link to an article on the  road construction accident.

If you or a loved one has been involved in a road or other construction accident, I am here to help. Our construction accident law firm in Indiana  represent injured construction workers and their families in construction accidents involving iron working, scaffolds, demolition, masonry and trench collapses throughout Indiana, including Indianapolis, Fort Wayne, South Bend, Terre Haute and Evansville. Be Safe!

 Accident on U.S. 31 SouthPolice investigate an accident involving at least three vehicles including heavy machinery at an accident on US 31 south near SR 4 on Thursday, May 7, 2009. (Tribune Photo/SANTIAGO FLORES

Evansville Indiana Road Construction Fatality Report from Your Road Construction Accident Lawyer Indiana

Monday, April 13, 2009 by John Daly




Dump truck wreck kills Indiana state highway worker

2009-03-26 04:49:58 (GMT) (JusticeNewsFlash.com - Employment Law, Justice News Flash)
INDOT employee hit and killed in truck wreck while working


 

Evansville Indiana Department of Transportation worker hit and killed by dump truck.

Evansville, IN (JusticeNewsFlash.com)–An Indiana Department of Transportation (INDOT) http://www.in.gov/indot/ worker, who was operating a lighted sign on I-164 on Tuesday was struck by a dump truck driver and killed. The Indiana Star reported, state employee Mark T. Shephardson, a 49 year-old Newburgh man, was transported by emergency medical personnel to St. Mary’s Hospital in Evansville. Shephardson died from the injuries he suffered in the truck wreck.

According to Indiana State Police, Shephardson, was operating a lighted arrow board to close one of the highway lanes to motorists on I-164, which circles Evansville. The dump truck driver, William M. Hurt, a 62 year old Boonville man hit the lighted board and the INDOT truck towing the state worker and the sign. Hurt was also injured in the fatal truck wreck and State Police say Indiana law requires all drivers to slow down or pull over in the presence of emergency vehicles and highway work crews.

These are preventable road construction accidents if basic road construction safety rules are followed.  If You or a loved one need a road construction accident attorney, our construction accident law firm in Indiana represents injured workers in Indianapolis, Terre Haute, Fort Wayne, Evansville and South Bend. If you have any questions, please call.  BE SAFE! Be on the lookout for road construction zones.

National Road Construction Safety Week notes from your Construction Accident Lawyer Indianapolis Indiana

Friday, April 3, 2009 by John Daly
 Driving through Noblesville Indiana your Road Construction Accident Lawyer Indiana saw a banner announcing the  tenth annual NATIONAL WORK ZONE AWARENESS WEEK.  Our Construction Accident Lawfirm Indiana  has  represented injured Indiana Construction workers in road construction accidents and  crane  accidents, trench collapse accidents and  scaffold accidents throughout Indiana, including  Indianapolis, Terre haute, fort wayne,  Evansville and Muncie.


"Drive to Survive - Our Future Is Riding On It"

 

 

April 6-10 marks the 10th anniversary of National Work Zone Awareness Week.  The national campaign is conducted every year at the start of the construction season to attract national attention to drive carefully through highway construction and repair sites. Each year, approximately 1,000 people are killed in roadway work zones and, with the recent enactment of the President’s economic recovery package which supports a good deal of highway repair and construction funding, 2009 could be one of the most active highway repair seasons in recent memory. The national kick- off media event takes place Tuesday, April 7 at 10 a.m in the Washington, D.C. metropolitan area. The slogan for the 2009 event is “Drive To Survive – Our Future Is Riding On It.” 

Next Week is National Road  Construction Zone  Safety weekSafety Fact Sheet

Safety: A FHWA Vital Few - Fact Sheet

How Safe is America's Roadway System?

In 2007, 41,059 people died on our Nation's roads.

How Significant is the Roadway Safety Problem?

Roadway safety is a serious, national public health issue. In 2007, there were 41,059.

Out of the total 41,059 fatalities in 2007, there were:

  • 24,147 road departure fatalities (59%)
  • 8,657 intersection fatalities (21%)
  • 4,654 pedestrian fatalities (11%)

Of the 41,059 fatal crashes in 2007, there were:

  • 13,040 speed related crashes (32%)

What is the FHWA Doing to Solve This National Safety Problem?

FHWA provides national safety leadership through: conducting innovative safety research; setting national highway safety guidelines; and promoting proven or promising safety technologies.

FHWA is actively pursuing improved roadway safety through a multi-faceted approach in the fields of engineering, education, enforcement, and coordination with public safety agencies (police and fire services).

FHWA also partners with a variety of organizations that are interested in improving roadway safety including: the International Association of Chiefs of Police (IACP), the Institute of Transportation Engineers (ITE), the American Association of State Highway and Transportation Officials (AASHTO), State Departments of Transportation, the National Association of County Engineers (NACE), the American Public Works Association (APWA) the Governors Highway Safety Association (GHSA), the Roadway Safety Foundation (RSF), the Transportation Research Board (TRB), the American Automobile Association (AAA), the Association of Metropolitan Planning Organizations (AMPO), and National Association of Regional Councils (NARC).

Engineering

On the engineering front, FHWA both conducts research and supports private sector research into a variety of innovative design features that create safer roads, intersections and pedestrian crossings.

Road safety design features that help to reduce road departures and minimize the severity of roadway crashes include: rumble strips, retroreflective signs, and forgiving roadside hardware (i.e. guardrails and breakaway poles), skid resistance pavements, and all-weather pavement markings.

Intersection safety design features that make intersections safer for drivers and pedestrians include: traffic signal timing, improved signage, exclusive turn lanes, and roundabouts.

Pedestrian safety design features that create safer pedestrian crossings for all pedestrians, including those with disabilities include: pedestrian-signal timings and pedestrian signals; improved lighting to enhance visibility; truncated domes for blind pedestrians; and refuge islands on a median.

In addition, FHWA is currently developing the Interactive Highway Safety Design Model (IHSDM) software -- an innovative road safety evaluation software that marshals available safety knowledge into a useful form for highway planners and designers.

FHWA is also actively promoting the use of proven or promising safety technologies that will help improve roadway safety including: rumble strips, retroreflective signs and pavement markings, and roundabouts. As the federal agency responsible for setting national highway safety guidelines, FHWA issued a technical advisory on rumble strips; is working on national guidelines for minimum sign retroreflectivity levels; and published a comprehensive information guide on roundabouts.

Education

FHWA's safety program has a strong educational component. Through a variety of educational tools and workshops, FHWA is dedicated to improving public safety awareness and updating highway engineers and roadway planners on the latest safety research.
To this end, FHWA has funded and sponsored numerous videos, handbooks, websites, multilingual brochures, CDs, manuals, computer modeling software, clearinghouses and training courses. Although these educational materials and courses are too many to detail here, a few are listed below.

For example, FHWA funded and sponsored the Pedestrian Safety Roadshow (PSRS), a four-hour educational workshop that is designed for use by community leaders, concerned citizens, and business leaders. The purpose of PSRS is twofold: to assist communities in developing their own approach to pedestrian safety and to increase awareness of pedestrian safety concerns.

Also, to help roadway planners and engineers apply the latest research and technologies on the needs of older drivers and pedestrians, FHWA published The Older Driver Highway Design Handbook and also offer a one-day workshop.

Enforcement

As part of our comprehensive safety program, FHWA engineers work closely with state highway engineers and law enforcement officials to identify appropriate engineering safety countermeasures for high risk locations and for new roads. Working with state and local law enforcement is one of the ways that FHWA makes sure that roadway safety is always a top priority.

Partnership Activities

FHWA believes that partnerships create synergy and are very important to improving roadway safety. FHWA participates in roadway safety partnerships with state and local officials, concerned citizens, local business leaders, schools and youth organizations. The partnership activities listed below are just a few of the safety partnerships that FHWA participates in. More information on FHWA partnership activities can be found on the FHWA Office of Safety web site (http://safety.fhwa.dot.gov).

FHWA's top partnership is working with AASHTO on the AASHTO Strategic Highway Safety Plan (SHSP). The goal is to reduce the annual number of highway deaths by 9,000 by 2008 to a rate of 1.0 (down from the current rate of 1.5). This will accomplished through improved safety in 22 key areas concerning infrastructure, vehicles, drivers, and emergency medical services (EMS). FHWA's role is that of providing national leadership, direction, and the development and demonstration of new safety innovations, technologies, and programs. (For more information, go to: http://safety.transportation.org).

FHWA is also currently partnering with the Roadway Safety Foundation (www.roadwaysafety.org) on two campaigns:  1) A Safer Roads:  Building Safety into Your Drive Public Information and Education program, and 2) The bi-ennial National Roadway Safety Awards (www.roadwaysafetyawards.org).

The successful National Work-Zone Safety Information Clearinghouse website (http://wzsafety.tamu.edu) is a good example of what can be accomplished when FHWA partners with other roadway safety groups. It was created in a partnership by FHWA and the American Road and Transportation Builders Association (ARTBA) and the Texas Transportation Institute (TTI) handles the site's day-to-day operations. The National Utility Contractors Associations (NUCA) and the Institute of Transportation Engineers (ITE) assist ARTBA in marketing and publicizing the clearinghouse.

Started in 1995 by FHWA, Stop Red Light Running (SRLR) is a national initiative to improve intersection safety by reducing the number of red light running incidents. The American Trauma Society became a partner with FHWA in 1998. Over 200 communities, including local law enforcement departments, are currently part of t his nationwide safety program.

In addition, FHWA is a founding member of the Safety Conscious Planning (SCP) Working Group. This group is a national organization dedicated to providing state and metropolitan planners with “best
practices' and opportunities to integrate safety in the planning process. Other partners in the SCP Working Group include: AASHTO, TRB, GHSA, AAA, AMPO, NARC, ITE, and FHWA's DOT sister agencies -- NHTSA, FTA, and FMCSA. For more information on SCP publications and projects there are two web site addresses -- http://gulliver.trb.org/publications/circulars/ec025.pdf and http://rip.trb.org/browse/dproject.asp?n=6691.

The extensive implementation of yellow-green fluorescent signs around heavily traveled pedestrian crosswalks at school zones, hospitals and airports, is a visible, day-to-day result of successful FHWA and local community partnerships. To improve pedestrian safety through the use of this new pedestrian sign, FHWA partnered with local police departments, schools and hospitals. This new sign has proven to be more visible than the standard, non-fluorescent yellow sign that had been previously used to warn motorists of pedestrian crossings.

Who Is Responsible for Roadway Safety?

Everyone. We all are responsible for driving, walking, and biking safely on our Nation's roads. The engineers and planners have the responsibility to make sure that roads are designed and operating properly -- with safety for all road users in mind. Drivers and pedestrians have the responsibility to always be alert and obey the traffic rules. Passengers should always buckle up and act responsibly. The police and the courts have the responsibility to make sure that the traffic and pedestrian laws are enforced. Public safety agencies have the responsibility of responding to and securing crash locations and enforcing traffic laws. Local communities and county and state governments need to allocate funding for safe roads and increase public awareness about road safety. Everyone should take responsibility for roadway safety.

10 Tips for Driving and Walking Safely

  1. It's your responsibility to drive and walk safely so always be alert and attentive to the motorists and pedestrians around you.
  2. Never drink and drive. And don't let friends drive drunk.
  3. Always buckle up. The life you save could be your own.
  4. Obey traffic signals and signs. They are there to keep you and others safe.
  5. Make sure you have plenty of time to get to your destination so you don't feel pressured to speed or disobey traffic signals.
  6. Don't give into road rage. Your life and the lives of your passengers are more important than angrily reacting to an irresponsible driver.
  7. Pedestrians should always wear light-colored or reflective clothing at night to be more visible to drivers.
  8. Before you take a left turn at an intersection, make sure it is safe to do so. (More than one-third of all deaths to vehicle occupants occur in side-impact crashes. Most of these occur at intersections.)
  9. Obey the speed limits and make sure you drive carefully through intersections and work zones.
  10. Don't drive when you are drowsy. If you are drowsy, pull over at a rest area and take a nap before proceeding.

Download the free adobe acrobat reader to view PDFs You will need the Adobe Acrobat Reader to view the PDFs on this page.

$2.9 Million Dollar Indiana Construction Accident Settlement from Your Construction Accident Lawyer Indianapolis Indiana

Wednesday, April 1, 2009 by John Daly
Your Construction Accident Lawyer  Indiana is humbled to report a $2.9 million dollar settlement on behalf of his iron worker client seriously injured in a work accident in November, 2006 in Indianapolis Indiana. In order to protect his privacy, I will not report his name, but the facts may help prevent another near fatal Indiana Construction accident involving ironworkers. Our law firm's client fell while installing metal decking on an addition  to a commercial  structure in downtown Indianapolis. No fall protection was provided for the iron workers, in fact the steel erection company that employed them did not even own the  retractable lanyard fall protection required. In addition, no controlled decking zone was established, so fall protection was definitely required. If you or a loved one has been involved in a construction accident in Indianapolis, Fort Wayne, Terre Haute, South Bend, Muncie or Evansville, please give us a call- no recovery, no fee. Our clients include construction workers injured in ironworking, steel erection, masonry, trench collapse, crane accidents, scaffold accidents and lock-out tag-out electrical injuries. BE SAFE!

Here is OSHA's Report on the most frequent construction safety violations:

  
Most Frequently Cited Standards

The following were the top 10 most frequently cited standards in fiscal year 2008 (October 2007 through September 2008):
  1. Scaffolding, general requirements, construction (29 CFR 1926.451) [related topic page]
  2. Fall protection, construction (29 CFR 1926.501) [related topics page]
  3. Hazard communication standard, general industry (29 CFR 1910.1200) [related topic page]
  4. Control of hazardous energy (lockout/tag out), general industry (29 CFR 1910.147) [related topic page]
  5. Respiratory protection, general industry (29 CFR 1910.134) [related topic page]
  6. Electrical, wiring methods, components and equipment, general industry (29 CFR 1910.305) [related topic page]
  7. Powered industrial trucks, general industry (29 CFR 1910.178) [related topic page]
  8. Ladders, construction (29 CFR 1926.1053) [related topic page]
  9. Machines, general requirements, general industry (29 CFR 1910.212) [related topics page]
  10. Electrical systems design, general requirements, general industry (29 CFR 1910.303) [related topic page]

The following are the standards for which OSHA assessed the highest penalties in fiscal year 2008 (October 2007 through September 2008):
  1. Fall protection, construction (29 CFR 1926.501) [related topics page]
  2. Scaffolding, general requirements, construction (29 CFR 1926.451) [related topic page]
  3. Electrical, hazardous (classified) locations (29 CFR 1910.307) [related topic page]
  4. Control of hazardous energy (lockout/tagout), general industry (29 CFR 1910.147) [related topic page]
  5. Excavations, requirements for protective systems, construction (29 CFR 1926.652) [related topics page]
  6. Machines, general requirements, general industry (29 CFR 1910.212) [related topics page]
  7. General duty clause (Section 5(a)(1) of the OSH Act)
  8. Powered industrial trucks, general industry (29 CFR 1910.178) [related topic page]
  9. Walking-working surfaces, general requirements (29 CFR 1910.22) [related topic page]
  10. Process safety management of highly hazardous chemicals (29 CFR 1910.119) [related topic page]

For more detailed information, visit Frequently Cited OSHA Standards. At that site, you can generate a report on the most frequently cited federal or state OSHA standards by your SIC code and the number of employees in your establishment.